Payment & Shipping Terms:
|Product Name:||250A Diesel Welding Generator||Engine Type:||4 Stroke ,Air Cooling Diesel Engine|
|Welding Current:||20 To 250A||Cooling System:||Air Cooling|
|Alternator Type:||Rare Earth Permanent Magnet||Engine RPM:||1500rpm To 1800rpm|
|Frequency:||50Hz Or 60Hz||Protection Class:||IP23|
|Start System:||Electric Start||Warranty:||12 Months|
genset welder generators,
portable welder generator
TIG MMA 250A DC Welding Unit Diesel Welder Generator Air cooled 3kw Inverter Electrode 5mm
250A diesel engine driven welder generator is Arc burning steady, good weld-seam shaping, ease of arcing, less spatter, low voice, high efficiency.
-Strong output auxiliary power source is suitable for lighting, polishing, etc site operation; Equipped with primary excitation circuit to avoid loss of magnetic excitation
-Adopt intermediate frequency three-phase rectifier, has the advantages of smoothcurrent, good dynamic characteristics,fast response speed (1-3ms). It can meet different welding requirements,and is suitable for all kinds of acid electrode, basic electrode and argon arc welding works.
-Adopt rare earth permanent magnet technology, has the advantages of smaller size, lighter weight, low iron loss and higher efficiency(efficiency up to 90%).
- Abandon the IGBT (insulated gate bipolar transistor) control system, substituted by adopting the "embedded" control mode, which greatly improve the reliability of the control system.
|Welding no-load voltage(V)||90V|
|Range of current(A)||20 - 250|
|Power factor (cosΦ )||1|
|Engine type||Single-cylinder, vertical, 4-stroke air-cooled diesel engine|
|Fuel||0# or -10# light diesel fuel|
|Lubrication oil volume(L)||1.65|
|Combustion system||Direct lnjection|
|AC Output Socket||2|
|AC circuit breaker||yes|
|Oil warning light||yes|
Contact Person: Sales Manager